Model 337
Hydraulic Power Unit. Provides "muscle power"
to the UNIFLOW," Twin Cylinder Ram. Increases
melt rate by as much as 50 to 75%. Rapid platen fin penetration
reduces drum change time to less than 2 minutes. |
|
Model 160
Clam Shell Re-Inforcing Jacket. Eliminates drum splitting
by closing around a 22-1/2" I.D. fibre drum, giving
it "steel drum" strength. Allows use of fibre
drums with minor damage, such as cuts, creases or small
punctures. |
|
Model 247
Hydraulic Power Clamping System for Model 160 Clam Shell
Jacket. Allows pushbutton activation of an automatic clamping
cycle, resulting in uniform clamping force along the entire
fibre drum wall. |
|
Model 369
Air-Actuated Bleed/ Boost Valve with Release-Coated Bleed
Pan. Pressing a remote push-button, either safely bleeds
drum "head space" air, or injects boost air
under follower during drum change. |
|
Model 204
MPC Pump Discharge Transducer with meter display of pump
pressure. Utilizes PID Control-ler to maintain pump pressure
during variable flow demand. |
|
Model 034
Heated, Air-Actuated, Automatic Ball Valve with optional
0-Ring Face Seal "Manifold-Mount" End Plate. |
|
Model 102
4-20 ma Micropro-cessor Level Control with digital readout
of tank level. Includes:
4-20 ma Output Card for proportion-ing UNIFLOW
delivery rate in response to tank level.
|
|
Model 175
Heated Anti-Drain Valve with external "zero cavity"
Valve Seat. This "self opening" valve eliminates
"crosslink plugging" of the discharge tip when
dispensing moisture curable PUR adhesives. Has 8:1 flow
balance adjustment without utilizing the conventional
(and troublesome) needle and seat design. |
|
| 3"
Solid Steel Base Plate for 13 and 20 Ton UNIFLOW
Rams. |
|
| 1-11/2"
Solid Steel Base Plate for 8-Ton UNIFLOW Ram |
|
