Model 181
34KW , finned platen with 6000 sq. in. of heat transfer
area. melts most low and medium viscosity adhesives at
up to 500 LBS/HR (MAX. TEMPERATURE 425° F) |
|
Model 381
Tapered fin platen with "heat isolated" SEG-O-SEAL®
cylinder. The TFE hardcoat, tapered fin section melts
most low, medium and high viscosity polyamid and polyester
resins @ 400 to 500 lbs/hr (Max. Temperature 550°
F)
|
|
Model 081
34kw (optional 54kw) finned platen with "heat isolated"
SEG-O-SEAL® Cylinder. Seals maintain moderate temperature
during high volume melting. 6000 sq. in. finned section
melts most low and medium viscosity adhesives at up to
900 lbs/hr (1400 lbs/hr with 13 and 20 Ton Rams (Max.
Temperature 550° F)
|
|
Model 481
PUR, 34KW flat-faced SEG-O-SEAL® Platen with TFE hardcoat
release surface. Melts moisture curable PUR adhesives
at approximately 280 lbs/hr.
|
|
Model 1081
5-gallon SEG-O-SEAL® flat-faced Melting platen with
TFE hardcoat release surface. Allows air-tight, direct
extrusion dispensing from standard 11¼ I.D., straight-sided
pails.
|
|
Model
1181
5-Gallon SEG-O-SEAL® tapered fin melting platen with
TFE hardcoat release surface. Allows air-tight, direct
extrusion dispensing from standard 11¼ I.D., straight-sided
pails.
|
|
