Model
1030HB "Pumpless" Direct Extrusion 5 Gal Pail Unit
About
Products/Machines
Options
Custom
Solutions
Applications
SegOseal
Site
Map
Contact
Home
20
Ton Hydraulic Drum Unloader
Model 130
8
Ton Hydraulic Drum Unloader
Model 230
5
Gallon Pail Unit
Model 1030H
"Pumpless"
Direct Extrusion 1 Gal Pail Unit
Model 1430HC
Vacuum
De Gassing Chamber
Model 2030
Pressurized
Reservoir Metering System
Model 2035
Explosion
Hazard Area Drum Unloader
Model 430
High
Viscosity Shot Dispensing Head
Model 460
13
Ton, High Output, Hydraulic Drum Unloader
Model 030A
"Pumpless"
Direct Extrusion 5 Gallon Pail Unit
Model 1030HB
Delivers
hot melt moisture curable "pur" adhesives directly
to the dispensing head, without a pump ( at pre-set pressures
up to 200 psi ) no motor, no gearbox, no pump, no problems
with crosslinking. The unique combination of hydraulic ram
and "pail re-inforcing" jacket allows molten pur
to flow from beneath the heated platen directly into the heated
hose and right to the dispensing valve.
FEATURES:
Adjustable
ram force for setting pur pressure
Over-night
shut-down and re-start the next day with no purging
Flat-face
platen with teflon release surface
Multiple
output hose and valve capability without flow variation
(when valves are opening and closing randomly)
Two
to three minute pail change with flow resumption in
4 minutes
Industrial
Machine Mfg. Inc.
8140 Virginia Pine Ct.
Richmond, VA 23237
Delivers
hot melt moisture curable "pur" adhesives directly
to the dispensing head, without a pump ( at pre-set pressures
up to 200 psi ) no motor, no gearbox, no pump, no problems
with crosslinking. The unique combination of hydraulic ram
and "pail re-inforcing" jacket allows molten pur
to flow from beneath the heated platen directly into the heated
hose and right to the dispensing valve. 
